Get Roof inspection prices from trusted roofers in Crewe

Mrs B***n P***n on June 2026
Richard Street, CREWE, CW1***
b****7@g***.com
some slipped tiles need putting back

Miss J***e S***n on June 2026
Tribune Drive, CARLISLE, CA3***
j****n@s***.com
One or two of the eaves caps have been blown away from the fitting – just needs screwed back on. I don’t think any parts are missing.

Mrs M***k R***n on May 2026
Somerville Street, CREWE, CW2***
m****8@i***.com
Loose chimney pots and brick work

Ms A***o X***r on May 2026
Ernest Street, CW2***
d****1@g***.com
need quotes for roof repairs.

Ms K***a Q***i on January 2026
Merlin Crescent,Townhill, Swansea, SA1***
i****i@g***.com
Hi i had a survery done and this is the report i would like to get an estimate of how much would this cost
Description:
The main roof over the property is a pitched roof, which has incudes both gable and hip structures structure.
It is covered with natural slates, which are laid over timber battens (that are nailed across the roof structure, which is covered
separately).There is no membrane beneath the slates, so no secondary layer of protection against rainwater ingress.
There are ridge and hip tiles bedded in cement mortar at the outward intersection of pitches, which are clay. There are also small verge
sections which are closed with the top edges of the rendered walls, with the slates forming a slight overhang.
The roof covering runs to the roof of the adjoining property and there is no joint between them – the slating is continuous.
Ventilation to the roof space is provided by vent tiles through the roof covering.
Condition:
Overall the roof covering appears to be in a fair condition, with only a few minor issues evident.
There are a few broken, slipped and/or missing slates
The ridge and hip tiles appeared to be becoming loose, as the mortar bond has deteriorated. Bedding ridges upon cement mortar creates
an weak bond, as the mortar does not adhere well to either the ridge or the covering (Most modern ridges are ‘dry-fixed’
, which are
mechanically screwed to the timber structure). In traditional mortar bedded roofs the weight of the ridge itself is a major contributor to it
staying in place. The hip irons are somewhat corroded (rust). The timber battens were found to have a high moisture content, considered
to be damp. This leads to decay and over time causes the nails securing the slates to corrode if they are not copper (and often they are
not).
Action:
No immediate action required.
However, we would recommend: within the next 5-10 years, removal of the entire roof covering including all slates and battens.
Replacement with a new slate covering, which would incorporate a membrane between the battens and the roof structure.

Mrs M***i K***r on December 2025
Woodside Avenue, Crewe, CW2***
m****r@g***.com
Leaking roof. Roof felt repair

Ms R***n F***r on November 2025
Badger Avenue, CREWE, CW1***
r****1@h***.com
Leak fixing, wet patch on bedroom ceiling

Ms J***n J***e on November 2025
James Atkinson Way, CREWE, CW1***
j****e@g***.com
Recently completed a rics level 2 survey of the property, and the findings related the roofing are given below.
two cracked tiles were noted on the front and rear elevations.
evidence of a small leak can be seen under the front valley in the roof void.
one cracked joint strip was noted on the rear; this strip needs to be replaced.
can you provide a quote for fixing these issues, please?
are you the property owner: owner of the property
property type: detached
property age: post-2000
how many bedrooms: 3-4 rooms
roof height: 1st floor
is your roof pitched or flat: pitched
what service do you require for your roof: repair
what is your roofing material: tiles
time scale: immediate
please call to appoint

Miss L***e G***e on March 2025
Chestnut Avenue, CREWE, CW2***
l****t@g***.com
Need a replacement of mortar on the ridge line tiles

Miss P***e S***l on February 2025
Calder Avenue, CREWE, CW1***
s****v@y***.co.uk
End cap tile looks to be gone plus possible storm damage to a few surrounding roof tiles